TENS Unit
Product Info & Technical
Specifications
Complete Kit: Case, Instruction Book, Battery, Lead Wires & 3 Packages of four electrodes

*FDA Approved, FDA # K894127

*Great Gift Idea

Channels:   Dual, isolated between channels
Pulse 
Amplitude:  Adjustable 0-80 mA peak either positive pulse or negative pulse into 500 ohm lead each channel, constant current.
Pulse Frequency: (Adjustable) 2Hz -120Hz
Pulse Width: (Adjustable) 40 - 250 
Modification Mode: Pulse width is automatically varied in a cyclic pattern over an interval of nominally 5.0 second. Pulse width decreases linearly over a period of 1.5 seconds from the control setting value to a value which is decreased 35% maximum. The narrower pulse width will continue for 2.0 seconds maximum, then increase linearly over a 1.5 second period to its original value. The cycle is then repeated.
Burst Mode: Bursts consists of 9 pulses at maximum pulse rate. Bursts occur twice every second.
Wave Form:  Modified square wave with zero net direct current (DC) component.
Load Mode: 500.00 OHM
Ver. Mode: CH1
Time/Div: 0.1MS
Volt/Div: 5.0V
Load Mode: 1m OHM
(open circuit)
Ver. Mode:  CH1
Volt/Div: 50.0V
All of the adjustable parameters are setting at the midpoint of the specified range.
Voltage : 0-110 Volt maximum (either positive  (open circuit) pulse or negative pulse.
Max Charge Per: 21 micro coulombs maximum
Pulse: Positive pulse and negative pulse separate
Battery: 9 volt battery (alkaline, or nickel-cadmium re-chargeable.)
Battery Life: Approximately 20 hours at nominal settings.
Size: 24x64x95mm
Weight: 140 grams (battery included)
There may be up to +/- 20% tolerance of all specifications.

*Caution* Federal law restricts this device to sale by or on the order of a practitioner licensed by the law of the state in which he or she practices to use or order the use of the device.

TENSEMS | Order Online | Home
For Further Info On Our Products, Email Us At:
miketens99@msn.com

This web site is administrated and hosted by Shadow Graphics & Design.
If you have any questions, comments or problems with this web site please contact us.